Cari punya cari akhirnya aku terjumpa satu website yang membekalkan produk untuk mengkaverkan balik cat-cat yang defect untuk minor kes. Dalam website tersebut, terdapat guide untuk bagaimana cara mengecat semula secara betul dan kita boleh memilih jenis cat mengikut code color yang seperti manufactured di kilang (OEM). Color yang aku gunakan adalah traquility Black Kod A0172. Color Code ni kita boleh jumpa dalam bonet enjin kereta dan pastikan color yang digunakan adalah sama nombornya dengan nombor produk yang ingin dibeli.
Aku pun buat order secara online and akhirnya telah pun menerima produk tersebut. Terdapat 4 product yang perlu kita gunakan secara berperingkat untuk mendapatkan kesan yang terbaik.
Aku still tak apply lagi produk tersebut pada kereta aku sebab tunggu masa terluang. Of course la kerja-kerja nak touch up ni perlukan situasi dimana kerja-kerja tersebut dapat dibuat dengan fokus yang lebih.
berikut adalah tutorial untuk menggunakan product ini, ianya di ambil dari http://www.ezytouchup.com/Direction-of-Use/q?cid=4&doit=showclass
IMPORTANT NOTE:
- Always test the paint before applying it to your vehicle.
- Keep on practice using a white cardboard from Step 1 to 3 before applying it to your vehicle.
- Do not try to brush surface larger than a ten cents coin. Larger surface must be sprayed.
- Do not apply overlapping the surrounding surface.
- Do not apply in wet and humid environment. Do not apply in direct sunlight.
- Make sure basecoat dry before applying clearcoat and let clearcoat dry before rubbing or polishing
- Allow the paint to dry for 30 days before waxing
- Store the paint in cool, dry place. Do not leave the bottle in your vehicle.
- Read and understand instructions given completely before apply. Please email us if you facing any problems during application.
STEP 1 - REPAIRING SURFACE PREPARATION | |||
A) Wash the surface with soap and water thoroughly. | |||
B) Rinse with water and then dry it up completely. | |||
C) Wipe or brush the surface with EZY Wax & Grease Removal. Clean with lint-free towel in one direction only | |||
STEP 2 - EZY BASECOAT APPLICATION | |||
A) Thoroughly shake the EZY Basecoat bottle before applying | |||
B) Prepare a color panel (white cardboard). Practice by apply several coats of EZY Basecoat on panel. Compare the panel with the color of the surrounding surface | |||
C) Apply one even and light coat of EZY Basecoat in one direction only. Caution: Please do not rub & only dab the color on. Be gentle with the brush without disturbing the undercoats, do not overlap existing clearcoat. Allow to dry for 2 to 5 minutes in between each layer of basecoat. | |||
D) You may repeat Step 2C until reaching the same base color as the surrounding surface and cover the whole defect or scratches. | |||
Note: For basecoat which is come with part A and part B (Tricoat) ,apply the part A first following by part B, application steps should refer to Step 2C and 2D. Part B should applied with 1 very thin layer only. | |||
E) After finish cover all the repairing area, allow basecoat to dry for 30 minutes. | |||
STEP 3 - EZY CLEARCOAT APPLICATION | |||
A) Apply one even, light coat of EZY Clearcoat in one direction only. Caution: Please do not rub & only dab the clearcoat on. Be gentle with the brush without disturbing the undercoats. Allow to dry for 10 minutes in between each layer of clearcoat. | |||
B) Apply second even and light coat of EZY Clearcoat in one direction only. Allow to dry for 4-5 hours before handling. | |||
| |||
OPTIONAL: If you found that the new paint not as glossy as surrounding paint or the surface looks inconsistencies after application. You can use the EZY Rubbing Compound to correct it after 24 hours clearcoat applied. | |||
STEP 4 - EZY RUBBING COMPOUND APPLICATION | |||
A) Thoroughly shake the bottle before applying |
| ||
B) Place a small amount of EZY Rubbing Compound on the new painted surface. | |||
C) Use a clean, soft cotton fabric. Apply even pressure by circular strokes to the surface Note : always apply by gently, over pressure may damage the new paint. | |||
D) Repeat Step 4B until the surface looks smooth and glossy. | |||
E) Wipe the surface with EZY Wax & Grease Removal | |||
* Do remember, don't wax the new paint for 1 month. |